Tracking hardware built for Australian conditions

Vehicle trackers

GPS tracking for cars, utes and vans, hardwired or plug-in.

Live location, trips, speed and driver behaviour for light vehicles. Choose a hardwired install for a tamper-resistant fit, or a plug-in unit you can fit yourself in minutes.

• Configurable reporting

  Updates every 10–60 seconds as standard, down to 1 second on supported devices. You choose the detail, and the cost follows.

• Store-and-forward

  Data is buffered on the device out of coverage and sent in full, in order, when the vehicle reconnects.

• Remote immobilisation

  Supported with a safety interlock and a full audit log.

• Self-install option

  Plug-in units go in without a technician, with same-day activation.

• HVM01

Heavy vehicle (HVM01)

The heavy vehicle black box for trucks, plant and specialist bodies.

HVM01 reads the vehicle and everything bolted to it. It takes engine and fault data straight from CAN, and auxiliary signals from drums, PTOs, bin lifts and water meters, reported separately so equipment hours are never blended with road hours.

• CANbus / J1939

  Engine, fuel, AdBlue, fault codes and engine hours. Odometer reported from both CAN and GPS. EV battery state of health and charge.

• Auxiliary I/O

  Digital, analogue and CAN inputs, with expansion modules for complex bodies.

• Equipment integration

  Proven in production on agitator drums with mixer control integration, PTO, bin-lift counting and WM01 water meters.

• Heavy vehicle compliance

  Pairs with Netcorp's NHVR-approved EWD, pre-start checks and fault management.

• Built for the yard

  Proven in concrete trucks and quarry loaders through dust, heat and vibration.

Self-powered asset trackers

Battery or solar tracking for anything without its own power.

For trailers, containers, bins, generators and equipment that spends time unhooked or parked on site. Mount it by magnet or screws and it's tracking within ten minutes.

• Up to 12 months on battery

  Or solar for indefinite operation in the field.

• Motion-triggered

  Wakes and reports when the asset moves, so it's quiet when parked.

• Under 10 minutes to fit

  Magnetic or screw mount, with no wiring.

• Built to be left outside

  IP67 sealed.

AI driver cameras

In-cab video with alerts that reach the driver before an incident does.

Road- and driver-facing video with AI detection of fatigue, distraction, phone use, smoking and seatbelt violations. Events are flagged in Netcorp360 with the clip attached, on the same timeline as GPS, speed and harsh-driving data.

• AI driver monitoring

  Fatigue, distraction, phone use, smoking and seatbelt violations detected in-cab and flagged with the clip.

• Video on the telematics timeline

  Footage sits with trip data in Netcorp360, not in a separate camera portal.

• Storage options

  256 GB to 1 TB on board.

MDVR multi-camera systems

Up to eight cameras around the vehicle, recorded on board and retrievable remotely.

Full coverage for heavy combinations: driver, road, trailer, rear and blind spot cameras configured to each truck and trailer. Fitted to new vehicles or retrofitted to the existing fleet.

• 6 or 8 channels

  Driver, road, multi-trailer, rear and blind spot coverage.

• Blind spot assistance

  Live views of the zones the driver can't see.

• Starlink option

  An all-in-one MDVR, GPS and CAN unit over satellite for operations beyond mobile coverage.

• Retrofit ready

  The same camera standard on older trucks as on new ones.

Sensors & accessories

Extra signals from the load, the body and the environment.

Add sensors to see what's happening beyond the engine: temperature in a refrigerated trailer, a door opening, light on a container, or humidity in a load.

• BLE sensors

  Low-power temperature, humidity and light sensors, on supported devices.

• Door and temperature sensors

  In production on trailers and containers.

• Third-party BLE tags

  Integrated through established BLE platforms.